Profile; D14582.07 User Guide Profile Series, Codec C Series, Quick Set C20, Mx200, July; Administrator Settings—Emc Resilience Mode - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started
Administrator settings—EMC Resilience mode
If the Touch controller is used in environments with
considerable amounts of electromagnetic noise present,
you may experience an appearance of false signals—as
if someone tapped the Touch controller when nobody
obviously did so.
To cope with this you may set the EMC Resilience Mode
to On. You must then press and hold for a little while,
rather than just tap, in order to make the system aware
of your tapping. This will avoid the appearance of false
signals.
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls Using directories
42
In-call features Settings Settings
User guide
Contact us
www.cisco.com