Camera Presets - Cisco TelePresence Profile Series User Manual

Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents Getting started Getting started

Camera presets

You may create predefined settings of where the camera points and the zoom. This is
referred to as camera presets. See the next page for more.
Do as follows:
1. Press the key on the remote control to display the Layout menu. Select Selfview
to be shown as required. In this way you will see what other will see of you in a call.
2. Press the key on the remote control to display the Home menu and select
Camera control.
3. Softbuttons will now appear. Press the Function key corresponding to Camera
presets (Function key number 2 from the left).
4. To hide the Camera presets, use the same Function key again.
Where to find camera presets
Camera presets
D14582.04 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, Nov. 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Making calls
Camera settings Main source Exit
Phone book usage In-call features
Using the presets (I)
Camera presets must have been defined before you do this.
key on the remote control to display the Home menu and select
Press the
Camera control. Use the
select a preset. The camera will now move accordingly. Note that this feature may
be used any time.
Sept
20
Using the presets (II)
Camera presets must have been defined before you do this.
Press the key on the remote control to display the Home menu and select
Camera control. Use the 0~9 keys to select a preset. The camera will now move
accordingly. Note that this feature may be used any time.
10
Advanced settings
CAMERA PRESETS
Pos. 2 Pos. 2
Pos. 2 Pos. 2
Pos. 3 Pos. 3
Add camera preset Add camera preset
and Arrow keys to navigate in the menu. Use
User guide
Contact us
CAMERA PRESETS
to
www.cisco.com