Camera Presets In A Call; Near End Camera Control; Far End Camera Control - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Camera presets in a call

There may be camera presets stored on your system.
If so, these are available at all times during a call. How
to define camera presets is described in
camera preset" on page 8. Do as follows:
1. Tap the camera icon, as outlined:
2. Select the preset required, as outlined:
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English

Near end camera control

You may control your own camera manually at all
times during a call. Your own camera is often referred
"Adding a to as the near end camera. Do as follows:
1. Tap the camera icon, as outlined:
2. Adjust camera Pan and Zoom, as outlined:
3. Tap anywhere outside the menu to exit.

Far end camera control

If the other participants are on systems with adjustable
cameras, you may be able to control the pan and zoom
of their camera. Do as follows:
1. Tap as outlined. If you are in a call with more than
2. Then tap Camera Control.
3. Adjust pan and zoom as required:
4. Tap anywhere outside the menu to exit.
24
one (a conference), tap the one whose camera you
want to adjust.
User guide
www.cisco.com