GlammFire KIT Glamm 3D Plus 500 Manual
  1. Manuals
  2. Brands
  3. GlammFire Manuals
  4. Indoor Fireplace
  5. KIT Glamm 3D Plus 500
  6. Manual

GlammFire KIT Glamm 3D Plus 500 Manual

Electric
Hide thumbs Also See for KIT Glamm 3D Plus 500:
Table of Contents

Advertisement

Quick Links

KIT Glamm 3D Plus 500 / 1000
Capacity
1,3 litres / 2,6 litres (filtered water)
Autonomy
8 hours
Voltage
220/240 V
Frequency
50 Hz
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic
Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives
2006/95/EC and 2004/108/EC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KIT Glamm 3D Plus 500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GlammFire KIT Glamm 3D Plus 500

Summary of Contents for GlammFire KIT Glamm 3D Plus 500

  • Page 1 KIT Glamm 3D Plus 500 / 1000 Capacity 1,3 litres / 2,6 litres (filtered water) Autonomy 8 hours Voltage 220/240 V Frequency 50 Hz The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives...
  • Page 2 GlammFire. PAG./2...

  • Page 3: Table Of Contents

    9—After-Sale Service 10—Warranty Congratulations on purchasing your GlammFire Electric appliance. This quality product has been designed with preci- sion and rigour that characterizes us to offer you pleasant and soothing moments. Please read the instructions for use carefully and effective before using the appliance.
  • Page 5 GlammFire. PAG./5...
  • Page 7 GlammFire. PAG./7...

  • Page 8: 1-Components

    GlammFire. PAG./8 1—Components Decorative Tank Lighting...

  • Page 9: 2-Important Safety Advice

    GlammFire. PAG./9 2—Important Safety Advice When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following: If the appliance is damaged, check with the supplier before installation and operation.

  • Page 10: 3-General Information

    3—General Information Only use filtered water in this appliance. Unpack the appliance carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. Always ensure that the appliance is sitting on a level surface. The appliance is a flame effect only.

  • Page 11: Surround Design

    4.3—Surround Design The Kit Glamm 3D Plus 500 and Kit Glamm 3D Plus 1000 are designed to be built into a surround/wall. Using the di- mensions provided in Fig1. you can design a cavity for the appliance. Be sure to allow room under and around the appliance for the water connection and the electrical connection.

  • Page 12: Water Supply

    4.6—Connecting the Receiver Take your Receiver, button for Kit Glamm 3D Plus 500 and button for Kit Glamm 3D Plus 1000, and with the Fuelbed removed insert the 3.5mm jack into the socket at the back of the appliance (Fig.5). The Receiver has a cable length of 1.4m which will allow you position it anywhere around the product.

  • Page 13: 5-Operating The Fire

    5.1—Manual Controls The manual controls are located beneath the Fuelbed. (Fig. 6) Kit Glamm 3D Plus 500 Mains Switch ‘A’:- Controls the electricity supply to the appliance. Note: This switch must be in the ‘ON’ ( I ) position for the appliance to operate Button panel ‘A’:- Controls the functioning of the appliance...

  • Page 14: Getting The Desired Flame Effect

    GlammFire. PAG./ 5.2—Getting the desired flame effect 1. Switch the appliance on by pressing the main switch to the on position and pressing the on/standby button. The flames will start after 45seconds. The flames will be at max height for 5seconds and then reduce to a nominal level 2.

  • Page 15: Receiver Controls

    The operation of the remote control is the same as described in ‘Receiver Controls’. Pairing to multiple products: If you are installing multiple Kit Glamm 3D Plus 500/1000 products you can pair them to one remote control. To do this, please install the products as described in the “Installation Instructions”. Please ensure that the products are connected to mains power and have water supplied.

  • Page 16: 6-Maintenance

    6—Maintenance 6.1—General Tips Only use filtered tap water in this appliance. Always ensure that the appliance is sitting on a level surface. If you intend not using the appliance for longer than 2 weeks, remove and empty the sump and water tank. Once installed, never move this appliance or lay on its back, without draining the water from sump and water tank.

  • Page 17: 7-Troubleshooting

    GlammFire. PAG./ Air Filter Gently lift out the fuelbed and place carefully on the ground. Gently slide the air filter upwards out of its plastic holder. (See Fig.11) Gently rinse with water in the sink and dry with fabric towel before returning.

  • Page 18: 8-Overall Dimensions

    If the product fails during normal and proper use (not considering the above mentioned events) within the warranty period, GlammFire will replace the product free of charge. Our warranty is offered as an addition to your statutory rights. It is applicable to the original purchaser only, non- transferable.
  • Page 19 Name and Address of the Distributor The GlammFire is always concerned with the environment. This is reflected when the projection of their products and their packaging. Focusing on the reduction of energy consumption, raw materials, natural resources and quantity of waste generated, GlammFire follows the policy of the 4R's (Reduce, Reuse, Recycle and Recover).
  • Page 20 Recuperadores Pachinha Lda. Zona Industrial da Lagoa, Lote G1 4950-850 CORTES - MONÇÃO PORTUGAL Tel(+351) 251 654 800 Fax(+351) 251 654 801 info@glammfire.com www.glammfire.com PT07711-D...

This manual is also suitable for:

Kit glamm 3d plus 1000

Table of Contents