Mira Platinum Installation Manual page 57

operates as normal.
Note! When used with some combination boilers, the warm-up function may
be impaired. This is due to the functional nature of combination boilers.
F4 - Clock Setting. To set the time.
F5 - Clock Display. When Clock
Display is "on", time is displayed
when shower has stopped, or after 10
seconds of inactivity whilst the shower
is running. When Clock Display is
"off", the time is replaced by the
on off
showering temperature.
F6 - Calibration Number.
F7 - Flow Range. The water flow rate (showering force) can be adjusted
to within a desired range by setting a low point and a high point. During
adjustment the shower will need to be started.
F8 - Control Frequency. An unreliable functioning of the appliance (not
always able to change settings of shower) may indicate radio interference
by another device transmitting locally on same channel. Changing channel
may resolve this problem.
13