Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1. The power level of the
cooker hood is not reduced. Depending
on the power level set for the hob it
may even increase.
The settings for the cooking zones and
the timer settings cannot be changed,
the hob can only be switched off. The
minute minder, Booster times and times
for Auto heat-up continue.
When deactivated, the cooking zones
will run on the setting that was
previously selected.
If the function is not deactivated within
1 h, the hob will switch off.
Activating / Deactivating
Touch the sensor.
Use this function if there is a danger of
food boiling over.
Additional functions
Recall
If the hob is switched off in error during
operation, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
Switch the hob on again.
The previously set power level flashes.
Touch one of the flashing power
levels immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.
39
Hide quick links:
Advertisement
Table of Contents
