Additional functions
Wipe protection
The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The is not locked.
Activating
Touch the sensor.
The time will count down in the timer
display.
Deactivating
Touch the sensor until the timer
display goes out.
Demonstration mode
This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
Switch the hob on.
Touch the 0 and 2 sensors on one of
the numerical keybanks for 6
seconds.
will alternate with (Demonstration
mode active) or (Demonstration
mode deactivated) in the timer display
for a few seconds.
40
Displaying hob data
The model designation and software
version can be displayed. There must
not be any pots or pans on the hob.
Model designation
Switch the hob on.
Touch the 0 sensor on a numerical
keybank.
Touch the 0 and 4 sensors at the
same time.
The timer display shows 2 numbers
flashing alternately.
Example: flashing alternately with
= KM 1234
Software version
Switch the hob on.
Touch the 0 sensor on a numerical
keybank.
Touch the 0 and 3 sensors at the
same time.
Numbers will appear in the timer
display:
Example: : = Software version 2.00