Miele@home / Con@ctivity
Hob - Logging-on
To sign the hob onto Miele@home,
prepare the logging-on process on the
master appliance.
With the hob switched off, touch
the and sensors at the same
time until the symbol and
appear in the timer display.
After a few seconds :
(programme 01) will flash alternately
with : (code) in the timer display.
While : is shown in the display,
press the sensor as often as
necessary until : (programme
P:10) is displayed.
While : is shown in the display,
press the sensor as often as
necessary until : appears in the
display.
The signing on process will begin and a
scrolling bar will appear in the display.
The signing on process takes a few
minutes. As soon as it is completed
successfully, : will light up in the
display.
If the signing on process is not
completed successfully, repeat the
process.
While : is visible in the display,
touch the sensor until the
indicators go out to save the setting.
Finish signing on the cooker hood/
master appliance (see the relevant
instructions).
58
Signing off the hob
If you want to sign the hob off from
Miele@home, first carry out the signing
off procedure on the master appliance.
With the hob switched off, touch
the and sensors at the same
time until the symbol and
appear in the timer display.
After a few seconds :
(programme 01) will flash alternately
with : (code) in the timer display.
While : is shown in the display,
press the sensor as often as
necessary until : (programme
P:10) is displayed.
While : is shown in the display,
press the sensor as often as
necessary until : appears in the
display.
The signing off process will begin and a
scrolling bar will appear in the display.
The signing-off process will take a few
minutes. As soon as it is completed
successfully, : will light up in the
display.
If the signing off process is not
completed successfully, repeat the
process.
While : is visible in the display,
touch the sensor until the
indicators go out to save the setting.