Table of Contents
Advertisement
Operation
Cooker hood
The cooker hood will switch itself on
automatically if a there is a pan on the
cooking zone and a power level has
been set for that zone. The power level
on the cooker hood is set to suit to the
power level on the hob.
The power level of the cooker hood can
be manually altered at any time. For
light to heavy cooking vapours, select
from power levels 1 to 3. For short
periods of strong vapours and cooking
odours, e.g. whilst searing meat, select
the B Booster setting.
Switching the fan on and off
To switch the fan on touch the
appropriate sensor for the power
level you want.
To switch the fan off touch the 0
sensor.
If the fan is not switched off, it will
switch itself off automatically 12 hours
after the last time a control was
operated.
Booster
The maximum duration for the Booster
is 10 minutes.
To switch it off early, set a different
power level.
36
Fan run-on
It is advisable to run the fan for a few
minutes after cooking has finished This
helps to neutralise any lingering
vapours and odours in the air. The
following two options are available:
(5 minutes) and (15 minutes).
The run-on duration will be carried out
using the power level set during
activation. You can change the power
level during the run-on period.
Touch the or sensor to activate
the run-on period.
Touch the , or 0 sensor to
deactivate the run-on period.
If you switch the hob off with the
sensor, the run-on period will continue
through to the end.
Tip: To help release vapours effectively
with pans over 15 cm high, place a
wooden spoon between the lid and the
pan.
Hide quick links:
Advertisement
Table of Contents
