Cutting Height; Operation - Husqvarna AUTOMOWER 550H Operator's Manual

3.13.1 To calculate the timer setting
1. Calculate the dimension of your lawn in m
2
yd .
2 2
2. Divide the m / yd of the lawn with the
approximate operation capacity. Refer to
table below.
3. The result is equal to the number of hours
that the product must operate each day.
Note: The operation capacity is approximate and
timer settings can be adjusted.
Model Approximate operation ca-
pacity, m
®
Automower 208 / 248
550H
Example: A lawn of 1000 m
®
an Automower 550H.
2
1000 m / 208 ≈ 5 h.
2
1200 yd / 248 ≈ 5 h.
Days / h / day
week
7 5
3.13.2 Edit timer settings
Edit on the Timer Overview screen in the
Tap
®
Automower Connect app. Several timer
intervals can be useful to enable the lawn for
children's game or other activities during certain
hours. To disable mowing a whole day, uncheck
that day in the timer settings.
3.13.3 Edit current timer settings
1. Tap the pencil icon to edit an existing timer
setting.
2. Choose which days of the week and hours
the product should operate.
Save .
3. Tap
3.13.4 Add a new timer setting
1. Tap the plus sign.
2. Choose which days of the week and hours
the product should operate.
Save .
3. Tap
1102 - 002 -
2
/
2 2
/h / yd /h
2 2
/ 1200 yd , cut with
Timer settings
10:00 - 15:00 / 10
am - 3 pm

3.14 Cutting height

The cutting height can be varied from
MIN (5 cm / 2 in.) to MAX (9 cm / 3.6
in.).
CAUTION: During the first weeks after
a new installation, the cutting height
must be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered step by step
every week until the desired cutting
height has been reached.
3.14.1 To set the cutting height
1. Tap the horizontal bar and drag it to the
desired cutting height.
Save .
2. Tap

3.15 Operation

In the Operation's menu it is possible
to change the settings of the
timer, ECO mode and Spiral cutting .
3.15.1 Weather timer
Weather timer allows the product to
The
automatically adjust its mowing time based on
how fast the grass grows.
Weather timer is activated, the product
When the
needs time to decide the optimal mowing time for
the work area in question. For this reason it can
take a couple of days before mowing is optimized
Weather timer .
for the
The product can not operate longer than the
timer settings. It is therefore recommended to
only deselect the times when the product must
not operate. All other time should be made
Weather timer .
available for the
Weather timer is activated, it is very
When the
important to regularly check that the blade disc is
clean and that the blades are in good condition.
Any grass twisted around the blade disc shaft, or
blunt blades, can affect the
1. Tap the On/Off bar to enable/disable the
Weather timer .
Weather
Weather timer .
Installation - 23