Operating Mode - Park; Stop; Switch Off - Husqvarna AUTOMOWER 550H Operator's Manual

4.3.3 Secondary area
In the Secondary area mode, the product mows
until the battery is empty.
If the product charges in the
mode, it will fully charge, drive out about 50 cm /
20 in. and then stop. This indicates that it is
charged and ready to start mowing.
Note: It is recommended to change the operation
Main area before placing the product
selection to
in the charging station.

4.4 Operating mode - Park

Park the following operation
When selecting
selections can be chosen.
• Park until further notice
• Start on next timer
• Parking duration
4.4.1 Park until further notice
The product stays in the charging station until
another operating mode is selected by pressing
the START button.
4.4.2 Start on next timer
The product stays in the charging station until the
next Timer setting permits operation. This
operation selection is suitable when there is a
need to pause operation, for example for
temporary irrigation or for games on the lawn.
4.4.3 Parking duration
The product stays in the charging station for the
chosen park duration. This operation selection is
suitable if one wishes to pause an ongoing
mowing cycle and allow the product to stay in the
charging station.
4.4.4 The charging station's park button
The PARK button on the charging station is
applicable for Automower
call the product back to the charging station.
®
in the Automower Connect app offers the same
function. The PARK button on the charging
station is useful for instance when the product
operates in a large work area and the operator
does not have access to theAutomower
Connect app.
1102 - 002 -
Secondary area
®
550H. It is used to
Park
®
An LED in the PARK button is lit when the button
has been pressed. The LED diode goes out when
the product is parked in the charging station.
The product stays in the charging station until
®
Start in the Automower Connect app is
activated.
4.4.5 Operating mode - Pause
Pause in the Automower
When selecting
Connect app, the product stop the current activity
and pause. The product is paused until either
Park or Start is selected in the Automower
Connect app.

4.5 Stop

1. Press the STOP button on top of the
product.
The product stops and the blade motor stops.

4.6 Switch off

1. Press the STOP button on top of the
product.
2. Set the Main switch to position
®
®
0 .
Operation - 31