Husqvarna AUTOMOWER 550H Operator's Manual page 38

Message Cause
Outside work area The boundary wire connections to the
charging station are crossed.
The boundary wire is too close to the
edge of the work area.
The work area slopes too much by the
boundary loop.
The boundary wire is laid in the wrong
direction around an island.
Disturbances from metal objects (fen-
ces, reinforcement steel) or buried ca-
bles close by.
The product finds it hard to distinguish
the signal from another product installa-
tion close by.
Empty battery
The product cannot find the charging
station.
The guide wire is broken or not connec-
ted.
The battery is spent.
The charging station's antenna is de-
fective.
No drive
The product has got caught in some-
thing.
The work area includes a steep slope.
The guide wire is not laid at an angle
on a slope.
Wheel motor over-
The product has got caught in some-
loaded
thing.
38 - Troubleshooting
Action
Check that the boundary wire is con-
nected correctly.
Check that the boundary wire has been
laid according to the instructions. Refer
To install the boundary wire on page
to
19 .
Try moving the boundary wire.
Place the product in the charging sta-
tion and generate a new loop signal.
To create a new loop signal on
Refer to
page 27 .
Check that the charging station and the
guide wire are installed in accordance
with the instructions. Refer to
tion of the product on page 19 .
Find out where the break is and rectify
it.
Replace the battery. Refer to
on page 34 .
Check if the indicator lamp in the
charging station flashes red. Refer to
LED indicator lamp on the charging sta-
tion on page 43 .
Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
Maximum guaranteed slope is 45%.
Steeper slopes should be isolated. Re-
To put the boundary wire in a
fer to
slope on page 17 .
If the guide wire is laid on a slope, it
must be laid at an angle across the
slope.
Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
Installa-
Battery
1102 - 002 -