Husqvarna Fleet Services - Husqvarna AUTOMOWER 550H Operator's Manual

®
Automower Direct is useful if the operator has
®
the Automower Connect app and the PIN code,
but has not created a Husqvarna account.
®
Automower Direct is also useful if the
connection with the product is only temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity.
There is therefore a possibility to communicate
with the product through Bluetooth
short-range of the product. You can use
®
Automower Direct without a Husqvarna account
as long as you have the product PIN code.
®
Note: The Automower Direct connection is only
valid as long as you are within Bluetooth
If you move out of Bluetooth
®
loose the Automower Direct connection and you
must do the connection process again.
3.23.1 To start to use Automower
1. Download the Automower
your mobile device.
®
2. Select Automower Direct on the start
screen of the Automower
®
3. Start Bluetooth on your mobile device and
on the product, refer to
for the first time on page 21 .
4. Select the product to pair with in the
®
Automower Connect app.
5. Enter the PIN code for the product.
Note: You have access to the menus and
functions as long as you are within Bluetooth
short-range.

3.24 Husqvarna Fleet Services

Husqvarna Fleet Services
that gives the commercial fleet manager an
overview of all products. It also gives the fleet
manager the possibility to control all products
remotely. Husqvarna Fleet Services
®
for Automower 550H. For more information
about Husqvarna Fleet Services
www.husqvarna.com.
1102 - 002 -
®
if you are in
®
range.
®
range, you will
®
Direct
®
Connect app on
®
Connect app.
To start the product
®
™
™
is a cloud solution
™ is included
™
, refer to
3.24.1 To connect to the product with
Husqvarna Fleet Services
1. Download the Husqvarna Fleet Services
®
app and Automower
mobile device.
2. Create a Husqvarna Fleet Services
account (www.husqvarna.com).
3. Log on to the Husqvarna Fleet Services
app.
4. Set the Main switch on the product to
position 1 .
®
Note: The Bluetooth
for 3 minutes. If pairing has not been
successful within this time period, switch off
the product. Wait until the LED status
indicator is not lit, and then switch on the
product again.
5. Select the plus sign (+) in the Husqvarna
™
Fleet Services app.
Automower ®
6. Select and then
Pro . The Husqvarna Fleet Services
searches for available products within short-
®
range (Bluetooth ).
7. Select product.
Acquire pairing code to connect the
8. Select
product to your Husqvarna Fleet Services
account.
9. Obey the instructions in the Husqvarna Fleet
™
Services app.
Note: It is only necessary to pair Husqvarna Fleet
™
Services app and the product once.
™
™
Connect app to your
™
™
pairing mode is active
Automower ®
™
app
™
Installation - 29