Automower ® Connect (Bluetooth ® Only); Messages (Bluetooth ® Only); My Mowers; Automower ® Direct - Husqvarna AUTOMOWER 550H Operator's Manual

3.19.3.5 Time lock
A time lock can be set to decide how many days
will pass before the PIN code must be entered.
This means that the product cannot be operated/
controlled without first entering the correct PIN
code. When the time limit has passed the product
continues to mow as normal, but the PIN code
must be entered before any new commands or
settings can be done. When the PIN code is
entered, the product is ready to continue
operating. A setting between 1 to 100 days is
possible, and the default setting is 30 days.
3.19.4 GeoFence
The GeoFence function makes it possible to track
the movement of the product, for example in case
of theft.
Before GeoFence can be used, its center point
(origin) must be set. This is either done during
the first start-up sequence, or in the
menu.
Note: It is only possible to set the center point in
GeoFence with short-range connectivity
®
(Bluetooth ).
Note: The product must have access to GPS
satellites to be able to set a GPS position. If the
charging station is placed in a mower house,
under a roof or a large tree, try to place the
product out on the lawn. Then try to set
GeoFence again.
Settings > Security > GeoFence in
1. Select
®
the Automower Connect app.
2. Enable GeoFence by tapping on the On/Off
bar.
3. Save the GeoFence setting.
The GeoFence radius is 500 m.
Note: When putting the product into storage for a
long period, such as during the winter,
Husqvarna recommends to switch off the main
switch.
With the GeoFence function activated, you will
need the PIN code in order to switch off the
product. Once the main switch has been
switched off, the function will stay active for
another 12 hours. After that it will not be possible
28 - Installation
to communicate with the product and the
GeoFence function will not be active.
3.20 Automower
only)
3.21 Messages (Bluetooth
In this menu the previous fault and information
messages can be found. For some of the
messages, there are tips and advice to help to
rectify the fault.
Security
Note: The
Bluetooth
If the product is disrupted in any way, for
example it is trapped or the battery is low, a
message is saved relating to the disruption and
the time it happened.
If the same message is repeated several times,
this may indicate that an adjustment to the
installation or the product is required. Refer to
Installation on page 15 .

3.22 My mowers

When choosing
the products paired to your account, as well as
add new ones. If there are several paired
products it is possible to select one of them as
Current mower .
To pair a new product to the Automower
Connect app:
1. Select the plus sign (+).
2. Select model.
3. Follow the instructions in the Automower
Connect app to finalize the pairing.
3.23 Automower
Automower
communication, and is included in Automower
550H.
®
Connect (Bluetooth
®
Automower Connect you can
In
enable/disable the Automower
Connect module. You can also see the
signal strength, connectivity status,
initiate new pairing or remove the
product from the paired accounts.
®
Messages menu is only available for
®
short-range connectivity.
My mowers you can manage all
®
Direct
®
Direct uses short-range Bluetooth
®
®
only)
®
®
®
®
1102 - 002 -