Care of Sweden CuroCell AUTO4 User Manual page 6

Mattress (without cover)
3 static head cells.
2.2 Pump
1
1. Tube connector
2. Control panel
2.3 Pump functions – control panel
1
2
3
5
6
1. Automatic settings
This pump is equipped with a function that automatically sets the pressure based on the user's
weight, posture and position. There are three ways to use this function.
1. The system adjusts the settings automatically when the system has been started.
2. Press the button and the system readjusts the automatic settings.
3. The system itself will start this function if any significant changes occur during use.
Status lights
1. All three lights lit – Automatic settings adjustment under way.
2. Only the light under the checkmark (left) is lit – The mattress is ready to use, normal mode.
If the product is equipped with ventilated cells, they are found here (9 cells).
2
3
4
5
3. Fuses (two)
4. Off/On (0/1)
5. Power cord connector
6
C
P
R
6
7
6. Hooks
7. Air filter
4
7