Maintenance; Daily Maintenance; Regular Maintenance; Ordering Information - Kemppi KEMPACT MIG 2520 Operation Instruction Manual

4. MAINTENANCE

4.1. DAILY MAINTENANCE

Be careful of mains voltage when handling electric cables!
Clean the wire channel of the electrode and check the contact tip regularly. Always check the
condition of the mains and welding cable before operation and replace defective cables.
Note! Only a competent electrician is allowed to remove or install the mains cable!

4.2. REGULAR MAINTENANCE

KEMPPI –service workshops sign special service contracts with customers for regular maintenance.
All parts are cleaned, checked and if necessary, repaired. Also the operation of the welding machine
is tested.

5. ORDERING INFORMATION

Item
Kempact MIG 2520
GH 30 Gun holder
Feed roll 0.6-0.8
Feed roll 0.8-1.0
Feed roll 1.0-1.2
Feed roll 0.8-0.9
Feed roll 1.0-1.2
Feed roll 1.0-1.2
MMT 25
MMT 25
MMT 27
MMT 27
Earth cable 35 mm²
Transport unit ST 7
Transport unit P250
Lift hook
Gas hose
Front quide tube orange
Front quide tube white
Front quide tube silver
The unit fulfils the CE marking demands.
© Kemppi oy
V-groove
V-groove
U-groove
V-groove, knurled
V-groove, knurled
V-groove
3 m
4,5 m
3 m
4,5 m
5 m
6m
0.9-1.6 mm Ss
0.6-0.8 mm Fe, Mc, Fc
0.8-1.6 mm Al
Ordering number
6218520
6256030
9483070
9483071
9483072
9483073
9483074
9483075
6252513MMT
6252514MMT
6252713MMT
6252714MMT
6184311
6185290
6185268
4298180
W000566
W000431
W000451
W000449
Kempact mig 50 / 0635 –