Technical Data; Disposal Of The Machine - Kemppi KEMPACT MIG 2520 Operation Instruction Manual

6. TECHNICAL DATA

kempact Mig 2520
Mains connection
Connected load 40% ED
Mains cable/fuse
Load capacity
Adjustment range
Wire feed speed
Idle voltage
Power ratio
Efficency
Wires with filler
Shielding gas
Wire reel diameter
Thermal class
Measurements
Weight
Range of temperature for
use
Storage temperature for use
Degree of protection

7. DISPOSAL OF THE MACHINE

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
10 – Kempact mig 50 / 0635
60% eD
100% eD
40% eD
60% eD
100% eD
fe, ss
Cored wire
al
Cusi
3~400V +/-15%, 50/60hz
12 kVa 250a
10 kVa 207a
7,5 kVa 160a
4x1,5mm²-5m/16a delayed
250a /26,5V
207a /24V
160a /22V
10 - 30V
1 - 18 m/min
40-50 V
0,64 (250a / 26V)
0,87 (250a / 26V)
Ø 0,6 ... 1,0 mm
Ø 0,9 ... 1,2 mm
Ø 0,9 ... 1,2 mm
Ø 0,8 ... 1,0 mm
Co ² , ar, ar & Co ² mixed
gases
200 mm (5 kg)
h(180C) / b (130C)
l510 x W250 x h415
17,5 kg
-20C ... +40C
-40C ...+60 C
IP23C
© Kemppi oy