Using The Lcd Monitor - Panasonic SDR-H250GC Operating Instructions Manual

LSQT1212_GC(EN).book 114 ページ ２００７年２月１５日 木曜日 午前１０時１３分
Before using
3
To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
During recording
The removed lens cap can be attached to the
lens cap fixture.
Tripod receptacle
This is a hole for attaching the unit to the optional
tripod.
(Please carefully read the operating instructions
for how to attach the unit to the tripod.)
≥ When the tripod is used, the card slot cover
cannot be opened. Insert an SD card before
attaching this unit to the tripod. (l 125)
114
LSQT1212

Using the LCD monitor

You can record the image while viewing it on the
LCD monitor.
1
Place your finger on the LCD
monitor open part A and pull the
LCD monitor out in the direction
of the arrow.
A
≥ It can open up to 90o.
2
Adjust the angle of the LCD
monitor as desired.
≥ It can rotate up to 180o A towards the lens or
90o B towards the opposite direction.
A B
≥ The brightness and colour level of the LCD
monitor can be adjusted from the menu.
(l 133)
≥ The unit may be damaged or fail if the LCD
monitor is forcibly opened or rotated.