Panasonic SDR-H250GC Operating Instructions Manual page 180

LSQT1212_GC(EN).book 180 ページ ２００７年２月１５日 木曜日 午前１０時１３分
With a computer
≥ Depending upon the environment of your computer, if it does not support Hi-Speed USB (USB 2.0),
for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly
when you play back recorded images.
≥ Set the display resolution to 1024k768 (16 bits colour) or higher.
Select [start] # ([Settings] #) [Control Panel] # ([Appearance and Themes] #) [Display] and select
[Settings] tab, and then adjust [Screen resolution] and [Color quality].
≥ This unit's USB terminal is read only. It cannot be used to write data to the unit from the computer.
∫ Using Built-in SD Drive
Hardware IBM PC/AT compatible personal computer
OS Microsoft Windows 2000 Professional
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
CPU Intel Pentium II 300 MHz or higher
RAM 32 MB or more (64 MB or more recommended)
Interface USB 1.1 or later — A type
≥ The USB equipment operates with the driver installed as standard in the OS.
∫ Usable discs
The table below lists the types of DVD discs which can be used by the supplied software.
Disc type
DVD-R/iR
DVD-R DL /iR DL
DVD-RW/iRW
DVD-RAM
* If a DVD-RAM driver is installed, it may not be possible to use DVD-RAM discs.
≥ Depending on your computer, it may not be possible to use some of the DVD discs listed in the table
above.
≥ Refer to the operating instructions of your computer for details about the DVD discs which can be
written to on the computer.
≥ To playback a DVD disc created using ImageMixer3, the player must support playback of that DVD
disc. (Refer to the operating instructions of the player.)
≥ Use discs made by a trustworthy manufacturer. It may not be possible to record images properly if
you use low-quality discs.
For technical inquiries about this software, contact the PIXELA support website.
Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website is in English only.)
180
LSQT1212
Function
For creating discs
(DVD-Video format)/
DVD COPY
¥
¥
¥
j
¥: Can be used.
For creating discs
(DVD-VR format)
j
j
¥ (DVD-RW only)
*
¥
j: Cannot be used.