Selecting A Mode; How To Use The Joystick - Panasonic SDR-H250GC Operating Instructions Manual

LSQT1212_GC(EN).book 126 ページ ２００７年２月１５日 木曜日 午前１０時１３分
Setup
4
Securely close the card slot
cover.

Selecting a mode

The mode dial is used to switch between
recording and playback modes.
Rotate the mode dial slowly but surely.
Rotate the mode dial, and set the
desired mode pictograph to the
position shown in the illustration.
Video recording mode (l 137)
Use this to record motion pictures.
Video playback mode (l 156)
Use this to play back motion pictures.
Picture recording mode (l 140)
Use this to record still pictures.
Picture playback mode (l 160)
Use this to play back still pictures.
≥ Do not forcefully rotate the dial.
126
LSQT1212

How to use the joystick

This unit has a joystick for selecting functions,
performing operations, etc. so it is easy to
operate this unit with one hand.
Basic operations
Operations on the menu screen and selection of
files on the thumbnail view screen, etc.
Move the joystick up, down, left, or
right to select an item or scene, and
then press the joystick to set it.
1
3 4
2
1 Select by moving up.
2 Select by moving down.
3 Select by moving left.
4 Select by moving right.
5 Press the joystick to select the item.
≥ Menu screen operations (l 130)
Operations during recording
¬ Rotate the mode dial to select
.
1
Press the centre of the joystick,
and icons will be displayed on
the screen.
1/2 1/2 NEXT 1/2 NEXT NEXT
≥ The indication disappears when the centre of
the joystick is pressed again.
≥ The indication changes each time the joystick
is moved down.
5
or