Adjusting The Lcd Monitor - Panasonic SDR-H250GC Operating Instructions Manual

LSQT1212_GC(EN).book 133 ページ ２００７年２月１５日 木曜日 午前１０時１３分
Display style
[Y/M/D] 2007.12.15
[M/D/Y] 12.15.2007
[D/M/Y] 15.12.2007
≥ The date and time function are driven by a
built-in lithium battery.
≥ Make sure to check the time before recording.
≥ If the time display becomes [- -], the built-in
lithium battery has run down. Use the following
steps to charge the battery. When you turn on
the power for the first time after charging, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery
to the unit, and the built-in lithium battery will
be recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the OFF/
ON switch is set to OFF, the battery is still
being recharged.)
Adjusting the LCD
monitor
Adjusting the brightness and
colour level
1
Press the MENU button, then
select [SETUP] # [LCD SET] #
[YES] and press the joystick.
2
Screen display
The bar display moves.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
≥ When the LCD monitor is rotated by 180°
≥ These settings will not affect the images
Increasing and decreasing the
brightness of the entire LCD
monitor
Press the POWER LCD PLUS
button.
MENU
Move the joystick up or down to
select the item to be adjusted.
Then, move the joystick left or
right to make the adjustment.
towards the lens, the brightness and colour
level of the LCD monitor cannot be adjusted.
actually recorded.
Setup
POWER LCD
PLUS
133
LSQT1212