Table of Contents
Advertisement
LSQT1212_GC(EN).book 173 ページ ２００７年２月１５日 木曜日 午前１０時１３分
With other products
With a TV
Playback on TV
The motion pictures and still pictures recorded by
this unit can be played back on a TV.
≥ Use the AC adaptor to free you from worrying
about the battery running down.
1
Connect this unit and a TV.
S VIDEO IN
VIDEO IN
AUDIO IN
A AV/S cable (supplied)
≥ Insert the plugs as far as they will go.
* If the TV has an S Video terminal, also connect
the S Video plug to it. This allows you to enjoy
more beautiful pictures.
2
Turn on this unit, then rotate the
mode dial to select
3
Press the MENU button, then
select [MEDIA SELECT] # [HDD]
or [SD CARD] to select the
desired medium and press the
joystick.
4
Change the input channel on the
TV.
≥ The channel set will differ depending on the
terminal to which the unit is connected.
5
The image and audio are output on the TV.
[HDD] [SD]
∫ If the image or audio from this unit is not
output on the TV
≥ Check that the plugs are inserted as far as they
go.
≥ Check the connected terminal.
≥ Check the TV's input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
≥ If you have a TV with an SD card slot, the
*
motion pictures and still pictures recorded on
an SD card may be played back on the TV.
(Refer to the operating instructions of the TV
for details about TV compatibility.)
≥ If the images are not displayed correctly on a
A
wide-screen TV, adjust the aspect setting on
the TV. (Refer to the operating instructions of
the TV for details.) If the pictures are displayed
squeezed horizontally on a regular TV (4:3),
change the [TV ASPECT] setting on this unit.
(l below)
∫ To watch images with a 16:9
When playing back motion pictures recorded with
a 16:9 aspect ratio ([REC ASPECT] was set to
[16:9]) or still pictures recorded with a 16:9
aspect ratio ([PICTURE SIZE] was set to [
(SDR-H250)/[
TV with a 4:3 aspect ratio, the images may be
squeezed horizontally. In this case, change the
or
.
menu setting to play back the pictures in the
original aspect ratio. (Depending on the TV
setting, the pictures may not be displayed
correctly. For more information, please read the
operating instructions of your TV.)
Press the MENU button, then select
[SETUP] # [TV ASPECT] # [4:3]
and press the joystick.
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
With other products
Start playback on this unit.
aspect ratio on a regular TV (4:3)
] (SDR-H21/SDR-H20)) on a
0.2
]
2
173
LSQT1212
Advertisement
Chapters
Table of Contents
