ICP DAS USA I-7565-H1 User Manual page 28

[1] For "CAN1/2 SendMsg" block :
<1> "SendMsg Configuration" frame :
It is used to edit the CAN message parameters and users can
use "Add" button to add the CAN message to "CAN Message
Send Area".
<2> "Add" button :
It will add the CAN message from "SendMsg Configuration"
area to the last row in "CAN Message Send Area".
<3> "Modify" button :
It will modify the CAN message parameter from "SendMsg
Configuration" area to the assigned green row in "CAN
Message Send Area".
<4> "Delete" button :
It will delete the CAN message of the assigned green row in
"CAN Message Send Area".
<5> "Del Table" button :
It will delete all the CAN messages in "CAN Message Send
Area".
<6> "Send" button :
It will send the CAN message of the assigned green row in
"CAN Message Send Area". If the value in the "Timer" field is
zero, it will just send once. If not, it will send continuously by
PC timer.
<7> "HWSend" button :
It will send the CAN message of the assigned green row in
"CAN Message Send Area". If the value in the "Timer" field is
zero, it will just send once. If not, it will send continuously by
I-7565-H1/H2 High Performance USB/CAN Converter User's Manual (Ver 1.7, Aug/2011) ------------- 28
Figure 4-6-1: Send CAN Message Area