ICP DAS USA I-7565-H1 User Manual page 34

<3> "CAN Controller" combobox :
It is used to choose which CAN port that users want to
configure currently.
<4> "Get CAN Accepted IDs" button :
It is used to get CAN Filter-ID data of the assigned CAN port
and showed in the "CAN Filter-ID Table". The command result
also returns in the "Response" frame of "Config / Info Option"
block.
<5> "Set CAN Accepted IDs" button :
It is used to set CAN Filter-ID data of the assigned CAN port
according to the "CAN Filter-ID Table" content. The command
result also returns in the "Response" frame of "Config / Info
Option" block.
<6> "Save File" button :
It is used to save the "CAN Filter-ID Table" content to file.
<7> "Load File" button :
It is used to load the CAN Filter-ID data from file to "CAN
Filter-ID Table".
<8> "Delete Row" button :
It is used to delete the CAN Filter-ID data of the assigned
green row in "CAN Filter-ID Table".
<9> "Clear Table" button :
It is used to clear all the contents in "CAN Filter-ID Table".
[2] For "Config / Info Option" block :
There are several option functions provided for I-7565-H1/H2. The
following will illustrate all these functions.
<1> "Get_ModInfo" option :
It is used to get the related module info including "Module
Name", "Firmware Version" and "Hardware Serial Number" like
Figure 4-9.
I-7565-H1/H2 High Performance USB/CAN Converter User's Manual (Ver 1.7, Aug/2011) ------------- 34