Table of Contents
Advertisement
8.1.3 SetSlave
With this function, you can define the device as slave.
1. Access the main menu.
2. Tap the <Up/Down>button until"SetSlave"is displayed.
3. Press ENTER, the display will show"SetSlave".
4. Tap the <Up/Down>button the display will show "Slave1", "Slave2", "Slave3".
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.4 AutoProg
With this function, you can run the internal program. You can select the desired program under
"Select program". You can set the number of steps under "Edit program". You can edit the
individual scenes under "Edit scenes". With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.
1. Access the main menu.
2. Tap the <Up/Down>button until"AutoProg"is displayed.
3. Press ENTER, the display will show"AutoProg".
4. Tap the <Up/Down>button the display will show"Master1","Alone".
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.2 Info
8.2.1 TimeInfo
Cur Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows "XXXX", "XXXX" stands for the number of hours. The
counter is resetted after turning the device off.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Cur Time".
3. Press< ENTER>, the display will show"Cur Time".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
TotalHrs
With this function, you can display the running time of the device. The display shows
"XXXX", "XXXX" stands for the number of hours.
1. Access the main menu.
2. Press <Up/Down>, the display will show "TotalHrs".
3. Press< ENTER>, the display will show"TotalHrs".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Hrs
With this function, you can display last the running time of the lamp. The display shows
"XXXX", "XXXX" stands for the number of hours
1. Access the main menu.
2. Press <Up/Down>, the display will show "Last Hrs".
3. Press< ENTER>, the display will show"Last Hrs".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
12
XM1193-V1.0 -E
Advertisement
Table of Contents
