Appearance - Mitsubishi Electric GUG-01SL-E Technical Manual

7
Remote Controller PZ-01RC /
CHAPTER

3. Appearance

Display
The main display can be displayed in two different modes: "Full" and "Basic" . The factory setting is "Full" .
Full mode
Cool
Mode
Basic mode
Cool
Mode
* All icons are displayed for explanation.
Controller interface
Function buttons
• When the backlight is off, pressing any button turns the backlight
on and does not perform its function. (except for the
button)
• Most settings (except ON/OFF, mode, temperature) can be made
from the Menu screen.
29
Fan
Fri
Room
Set temp.
Temp.
Fri
Set temp.
Temp.
ON/OFF
3. Appearance
Operation mode
Dx-coil unit operation mode appears here.
Preset temperature
Preset temperature appears here.
Clock
Current time appears here.
Fan speed
This function is not available.
Button function guide
Functions of the corresponding buttons
appear here.
Appears when the ON/OFF operation is
centrally controlled.
Appears when the operation mode is
centrally controlled.
Appears when the preset temperature is
centrally controlled.
Room temperature
Current room temperature appears here.
Please erase room temperatures in the
initial setting when the SA temp. control
is selected.
ON/OFF button
Press to turn ON/OFF the Dx-coil unit.
SELECT button
Press to save the setting.
RETURN button
Press to return to the previous screen.
MENU button
Press to bring up the Main menu.
Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any
button turns the backlight on and it
will stay lit for a certain period of time
depending on the screen.
ON/OFF lamp
This lamp lights up in green while the
unit is in operation. It blinks while the
remote controller is starting up or when
there is an error.
Appears when the buttons are locked.
Appears when the ON/OFF timer
function is enabled.
Appears when the Weekly timer is
enabled.
Appears while power is ON.
Appears with room temperature.
Appears when the preset temperature
range is restricted.
The functions of the function buttons
change depending on the screen.
Refer to the button function guide that
appears at the bottom of the LCD for the
functions they serve on a given screen.
When the system is centrally controlled,
the button function guide that
corresponds to the locked button will
not appear.
Main display Main menu
Fri Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Room
Timer
Cool Set temp.
Weekly timer
OU silent mode
Main display:
Mode Temp. Cursor
Function guide
Function button F1
Main display : Press to change the operation mode.
Main menu : Press to move the cursor down.
Function button F2
Main display : Press to decrease temperature.
Main menu : Press to move the cursor up.
Function button F3
Main display : Press to increase temperature.
Main menu : Press to go to the previous page.
Function button F4
Main display: Not available.
Main menu: Press to go to the next page.
Page