Assembly Instructions - Marcy NS-1104U Owner's Manual

ASSEMBLY INSTRUCTION
• Tools Required For Assembling the Bike: One Double Open-ended Wrench and Allen
Wrench, provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this bike to
avoid possible injury.
STEP-1
A.) Attach the Front Stabilizer (#5) to the Main Frame (#1). Secure it with two M8 x 2 ¾" Carriage Bolts
(#21), two Ø ⅜" x Ø ¾" Curved Washers (#15), and two Domed Nuts (#16).
B.) Attach the Rear Stabilizer (#6) to the Main Frame (#1). Secure it with two M8 x 2 ¾" Carriage Bolts
(#21), two Ø ⅜" x Ø ¾" Curved Washers (#15), and two Domed Nuts (#16).
©IMPEX INC.
6
www.marcypro.com