Marcy NS-1104U Owner's Manual page 9

STEP-3
A.) Attach the Handle (#7) to the Front Post (#2). Secure it with one Clamp Bracket (#14), one Ø ⅝",
and T-shaped Lock Knob (#13).
B.) Connect the Upper Computer Wire (#24) from the top opening of Front Post to the Computer Wire
from Computer (#8).
C.) Connect the two Sensor Wires (#23) from opening of Front Post to sensor wires from Computer.
D.) Remove the two M6 x ⅜" Phillips Screws (#18) from Computer. Attach the Computer to the bracket
on Front Post. Secure the Computer with these two Screws.
©IMPEX INC.
24
23
8
02
www.marcypro.com