Assembly Instructions - Marcy ME-1018RE Owner's Manual

ASSEMBLY INSTRUCTION
Step 1
1. Attach the front stabilizer (#3) to the front of the main frame (#1). Secure using two carriage
bolts (#2), two curved washers (#6) and two domed nuts (#7).
2. Connect the computer sensor wire (#21) to the back of the computer (#9).
3. Attach computer (#9) to computer bracket (#62) and tighten with two screws (#10).
Note: Ensure that the wires are not pinched behind the computer.
2
3
© Impex Inc.
www.marcypro.com
10
21
1
6
7
6
9
62
6
7