Mode Setup; Selection Of Grid Certification Standard - INVT Photovoltaic Grid-connected Inverter Operation Manual

Three-phase photovoltaic grid-connected inverter

6.4.8 Mode setup

The default DC input mode of three-phase PV grid-connected inverter is "independent mode". If fig
6.12 appeared (namely PV string is re-connected to the inverter after passing through combiner
box), it is necessary to switch the DC input mode to "parallel" mode.
The inverter with single-channel input has no input mode setup function; the inverter with
dual-channel inputs has input mode setup function. See section 6.4.4 for the way to set the input
mode.

6.5 Selection of grid certification standard

After power up the inverter or restore to default setup for the first time, LCD will display a country
list for users to select the country, as shown below:
Country:
Germany
UK
Australia
Press " " or " " key to select country (see table below), press ENT key to finish setup. After
setting the country, use the inverter according to the requirements in this manual.
Reference table: Countries and grid standards:
No. Country
1
Germany
2 UK
3 Australia
4 Greece
Fig 6.12 "Parallel" input mode
Unset
Greece
Denmark
Holland
Grid standard
VDE0126& AR-N4105
G83/G59
AS4777
VDE0126
Country: Unset
Greece
Denmark
Holland
59
Display operation panel
China
Thailand
Other
Remark