Table of Contents
Advertisement
Installation
Three-phase photovoltaic grid-connected inverter
(2) Drill 6 installation holes on the wall with electric drill. As shown in Figure 4.8
Figure 4.8 Drilling
(3) Fix the expansion bolts to the 4/6 installation holes with hammer, as shown in Figure 4.9.
Figure 4.9 Install expansion bolts
(4) Fix the installation bracket onto the expansion bolts and ensure the installation is firm
enough(tightening torque is 13N•m) . As shown in Figure 4.10.
Figure 4.10 Fix the installation bracket
25
Advertisement
Table of Contents
Need help?
Do you have a question about the Photovoltaic Grid-connected Inverter and is the answer not in the manual?