Recommended.
Adjustments
The adjustments listed below have been performed at
the factory. However, because of the many variables
involved with shipping, we recommend that you verify the
adjustments to ensure the best possible results from your
new machine.
Step-by-step instructions for these adjustments can be
found in the SERVICE section starting on Page.41.
Factory.adjustments.that.should.be.verified:
•
Tensioning/replacing V-belts (Page.41).
•
Calibrating table elevation scale (Page.49).
•
Pulley alignment (Page.42).
Model W1862/W1863 (For Machines Mfd. Since 02/19)
After. approximately. 16. hours. of.
operation,.V-belts.will.stretch.and.seat.
into. pulley. grooves. and. need. to. be.
properly. tensioned. to. avoid. severely.
reducing. life. of. V-belts.. Refer. to.
Tensioning/Replacing. V-Belts. on. Page.
41.for.detailed.instructions.
-24-