Table of Contents
Advertisement
Model W1862/W1863 (For Machines Mfd. Since 02/19)
Dust.Collection
Recommended.CFM.at.Dust.Port:................. 400.CFM
Do not confuse this CFM recommendation with the rating
of the dust collector. To determine the CFM at the dust
port, you must consider these variables: (1) CFM rating of
the dust collector, (2) hose type and length between the
dust collector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines throughout
the system. Explaining how to calculate these variables
is beyond the scope of this manual. Consult an expert or
purchase a good dust collection "how-to" book.
This. machine. creates. substantial. amounts. of. dust.
during.operation..Breathing.airborne.dust.on.a.regu-
lar.basis.can.result.in.permanent.respiratory.illness..
Reduce.your.risk.by.wearing.a.respirator.and.captur-
ing.the.dust.with.a.dust.collection.system.
To connect the machine to a dust-collection system, fit a
4" dust hose over the dust port, and secure in place with
a hose clamp (see Figure.14). Tug the hose to make sure
it does not come off.
Note:.A tight fit is necessary for proper performance.
Figure.14..Dust hose connected to dust
-21-
port.
Advertisement
Table of Contents
