Inventory - Woodstock W1862 Owner's Manual

Inventory

The following is a list of items shipped with your machine.
Before beginning setup, lay these items out and inventory
them.
Note: If you cannot find an item on this list, carefully
check around/inside the machine and packaging materials.
Often, these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.
Box.1.(Figure.5).
A.. Planer Unit (Not Shown)..................................1
B.. Dust Port ....................................................1
C.. Cast-Iron Extension Tables (W1863) ....................2
D.. Roller Extension Tables (W1862) ........................2
E.. Table Elevation Handwheel ..............................1
Tools.and.Hardware.(Figure.6)
F. Flat Wrench 10/13mm ....................................1
G.. Open-End Wrench 12/14mm .............................1
H.. Hex Wrenches 3, 4, 6mm ...........................1 Ea.
I.. Set Screws M8-1.25 x 12 (Ext. Tables) .................6
J.. Flange Bolts M6-1 x 12 (Dust Port) .....................6
K.. Key 4 x 4 x 10 (Handwheel)..............................1
L.. LOW/HIGH Direction Label (Handwheel) ..............1
M.. Handwheel Handle (Handwheel) ........................1
N.. Hex Nut M10-1.25 (Handwheel) .........................1
O.. Flat Washer 10mm (Handwheel) ........................1
W1862.Only.(Figure.7)
P.. Hex Bolts M8-1.25 x 20 (Ext. Tables) ...................6
Q.. Flat Washers 8mm (Ext. Tables) .........................6
R.. Knife-Setting Jig
— Knife-Setting Jig Foot ..................................2
— Knife-Setting Jig Shaft .................................1
— E-Clip 9mm ...............................................4
W1863.Only.(Figure.8)
S.. Hex Bolts M8-1.25 x 25 (Ext. Tables) ...................6
T.. Flat Head Torx Screws #10-32 x 1⁄2" ................. 10
U.. Indexable Carbide Inserts 15 x 15 x 2.5 ...............5
V.. T-Handle Torx Wrenches T-25 ............................2
Model W1862/W1863 (For Machines Mfd. Since 02/19)
B
D
Qty
Figure.5. Box inventory.
H
G
F
Figure.6..Tools and hardware.
P
Q
Figure.7. Tools and hardware (W1862
S
Figure.8. Tools and hardware (W1863
-16-
C
O
K
N
L
LOW HIGH
R
only).
V
only).
E
I
J
M
T
U