Sim-Ring Mobility; Enable/ Disable Sim-Ring Mobility; Switching Call Conversation To Mobile - Cisco 8851 User Manual

CLOUD VOICE S Service – Cisco Unified IP Phone 8851
9

Sim-Ring Mobility

The simultaneous ringing features allow you to bring any incoming call to your
Cloud Voice number to both your desk IP phone and mobile.
9.1

Enable/ Disable SIM-Ring Mobility

1. Press the Mobility button to display the current status (Enable Mobile
Connect/ Disable Mobile Connect)
2. Press Select softkey to toggle the status.
3. Press the Exit softkey once you confirm the SIM-Ring Mobility status.
Note:
1. Please remember to submit your mobile phone number to WTT before you can
enjoy SIM-Ring Mobility.
2.
If the call is not answered in desk IP Phone and you have Enable Mobile Connect,
the incoming call will be diverted to your mobile phone normally after 4 rings.
9.2

Switching Call Conversation to Mobile

When you are using IP Phone for call conversation with your business partner
and wish to leave from your desk, you can continue the call conversation by
using switching call to mobile.
1. During the call conversation on IP Phone, press the Mobility button.
2. Select Send call to Mobile Phone.
3. The call will be in 'Hold' status and transferred to your mobile within few
seconds.
4. Please answer the call in your mobile & you can continue the call
conversation via your mobile.
5. Lastly, put back your handset back to IP phone.
Note: During the switching of call to mobile, the call will be in 'Hold' status. Suggest you
Version 4.0
to inform the other call party 'Just a moment, please'.
17
© 2018 WTT HK Limited, All Rights Reserved © WTT HK Limited 2017