Denon S-5BD Service Manual page 46

CHECK LIST FOR AFTER-REPAIR-CHECK
1-1 BD and DVD
Prepare for playback.
(1)
q Turn on the TV and subwoofer power.
w Change the TV input to the input of this unit.
ON
(2) Press to turn on power to
the unit.
Insert a disc.
(3)
• Press 5 on the main unit to open/
close the disc tray.
• When the disc tray opens, the input
source automatically switches to
"BD/SD" and the unit enters "Disc
Mode".
• If a disc is already inserted in the
disc tray, switch to "Disc Mode" by
BD/SD
selecting .
Make the various settings for
(4)
playback on the disc menu.
uio p ····················································
Select
ENTER
·························································
Confirm
• You can make the following settings
on the disc menu. (Settable items vary
depending on the disc.)
• Subtitle language
• Audio language
• Audio format etc.
• During DVD-Video playback, press
MENU POPUP/MENU
or to display the
menu.
If the menu continues, press
to get to the next part.
(5) Press in the Top Menu screen to select
uio p
the title or chapter.
1 – 9 +10
• If you use , to select the chapter or title, you can start
playback.
With Blu-ray Disc, depending on the disc, you can select title and
chapter from the popup menu.
(6) Press ENTER .
Playback starts.
Front
Rear
TOP
uio p
n n AdjustingnthenMasternVolume
VOL df
Press .
n n StopnPlaybackn(ResumenFunction)
Press 2 .
n n PausenPlayback
Press 3 .
n n Step-by-StepnPlayback
During pause, press
n n FastnForward/FastnReversenPlayback
During playback, press
n n SlownForward/SlownReversenPlayback
During pause, press
n n SkippingntonthenChapter
During playback, press
n n RepeatnPlayback
REPEAT
Press .
n n SwitchingnAudio
During playback of a Primary Audio/Secondary Audio title,
AUDIO/RDS
press .
NOTE
When playing back a high-quality signal such as Dolby TrueHD,
Dolby Digital Plus, or DTS-HD, set the "BD Audio Mode" to "HD
Audio Output".
Check Block
VIDEO : F/E Unit → B/E Unit → DIGITAL Unit(1/2)
AUDIO : F/E Unit → B/E Unit → DIGITAL Unit
(HDMI Reciver → DIR → Selector → A.DSP
→CODEC) → Analog Audio Unit(2/2) →
D.AMP Unit
46
3 .
6 7
.
6 7 .
8 9 or ui .