Denon S-5BD Service Manual page 41

Check the TV
Is the TV HDCP-compatible?
Is the TV compatible with resolutions of 1080P?
Is the TV's input set to HDMI?
Are the picture and sound output when a different TV is used?
Check the set (S5BD)
Is the set's input set to HDMI?
YES
Is the TV information properly
displayed on the "Monitor
info." display menu?
YES
Does the set's wallpaper image appear on the TV when the HDMI/DVI
cable between the BD/DVD player and the set is disconnected?
When using a DENON BD/
DVD player, is the fluorescent
display tube's "HDMI"
indicator lit?
If using a non-DENON BD/
DVD player, proceed to "NO".
YES
The HDMI input circuitry is defective.
(IC501/IC605/IC502 and surrounding circuitry)
YES
YES
YES
YES
YES
The set does not recognize
the TV.
Is IC701 pin 30 "H" (3V-5V)?
NO
With the TV connected,
check the voltage of the IC on
the side on which the TV is
connected.
YES
YES
The BD/DVD player
does not recognize the
connection with the set.
NO
Is the HDMI connector
(JK502/JK503/JK451) pin
19 "H" (5V)? With the BD/
DVD player connected, check
the voltage of the HDMI
connector for the input on the
side on which the BD/DVD
player is connected.
YES
NO
Use an HDCP-compatible TV.
PC TVs cannot be used.
If the TV is not compatible
NO with resolutions of 1080P,
no picture will be output,
even if the BD/DVD player's
resolution is set to 1080P.
Check the TV's input setting,
NO
referring to the TV's operating
instructions.
NO
The TV is defective.
Check the set's input setting,
NO
referring to the set's operating
instructions.
The pattern and circuit
NO
from the HDMI connector
(JK701) to the IC (IC701) is
defective.
Are the picture and sound
output from other Monitor
NO
Out terminals (VIDEO out,
S-VIDEO out or Component
out)?
NO
NO
The pattern and circuit from
the HDMI connector (JK502/
JK503/JK451) to the IC501/
IC502/IC451 is defective.
41
The HDMI
output circuitry
is defective.
YES
(IC701/
IC605 and
surrounding
circuitry)