Denon S-5BD Service Manual page 27

(5) Track buffer output mode
Press the 8 or 9 button to select "Y" and switch the track buffer output.
FL Display (The display part of 16 digits)
1 2 3 4 5
T E Y T r a c k
(Y=1 : Track buffer being output, 0 : Track buffer output off )
When the 2 button is pressed, the layer above the current layer is displayed. See "5.4 Stopping the mode".
(6) Picking up No. display mode
Press the 8 or 9 button to switch to the pickup number display.
The pickup number is a 14-digit number, so it is displayed in two sections.
FL Display (The display part of 16 digits)
1 2 3 4 5
T G X
(X (display position) = 1 : Lower digits, 2 : Upper digits. YYYYYYY: Pickup number)
When the 2 button is pressed, the layer above the current layer is displayed. See "5.4 Stopping the mode".
(7) Error log display mode
Press the 8 or 9 button to switch to the error log display.
For Error log No. and description of the displayed measurement results, see "Table 3: Error log details".
FL Display (The display part of 16 digits)
1 2 3 4 5
n T H X
(n : Error information No.(1 ～ 5), X : Error log No.)
Display when there is no error
FL Display (The display part of 16 digits)
1 2 3 4 5
n T H 1
When the 2 button is pressed, the layer above the current layer is displayed. See "5.4 Stopping the mode".
(8) Test mode cancel
A confirmation message is displayed. Press the 1 button to set, canceling the test mode.
FL Display (The display part of 16 digits)
1 2 3 4 5
T I 1
When the 2 button is pressed, the layer above the current layer is displayed. See "5.4 Stopping the mode".
6 7 8 9 10 11 12
B u f f
6 7 8 9 10 11 12
Y Y Y Y Y Y Y
6 7 8 9 10 11 12
6 7 8 9 10 11 12
N o E r r o r
6 7 8 9 10 11 12
R e a l l y ?
13 14 15 16
13 14 15 16
13 14 15 16
13 14 15 16
13 14 15 16
27