Bosch VIP X1600 Installation And Operating Manual page 19

VIP X1600 | Installation and Operating Manual
Rating plates
Every VIP X1600 module has a label on the circuit board containing a printed
MAC address by which the module can be uniquely identified. Take note of this
MAC address and the location in the VIP X1600 base before installation so that
you can later identify the module, even after it has been inserted, for example
when performing fault diagnosis.
Removing and exchanging VIP X1600 modules
Installing, removing and exchanging VIP X1600 modules in slots 2 to 4 can be
performed during operation.
Caution
Disconnect the VIP X1600 base from the power supply before installing a
module in Slot 1.
❚ Before removing a module, terminate all recordings currently running in this
module.
❚ When installing a module, please ensure that the cover is kept for future use.
❚ When removing a module, it is essential that the corresponding slot be closed
with the cover if a module is no longer to be used in this slot.
Bosch Security Systems | 2006-03 | V2.0
EN | 19
Installation