Bosch VIP X1600 Installation And Operating Manual page 120

EN | 120
Command inputs
After the connection has been established, you must log on to the VIP X1600
module to access the main menu. Other submenus and functions can be
accessed using the on-screen commands.
– If necessary, turn off the local echo so that entered values are not repeated
on the display.
– Enter one command at a time.
– When you have entered a value, such as an IP address, check your input
again before pressing the ENTER key to transfer the values to the VIP X1600
module.
Assigning an IP Address
Before you can operate a VIP X1600 module in your network you must first
assign it an IP address that is valid for your network.
The following default address is preset at the factory: 192.168.0.1
– Start a terminal program such as HyperTerminal.
– Enter the user name service. The terminal program displays the main
menu.
– Enter the command 1 to open the IP menu.
Appendix
Installation and Operating Manual | VIP X1600
Bosch Security Systems | 2006-03 | V2.0