Promax RANGER mini User Manual page 44

3 A window opens with several setting options. You can edit boxes (name,
location, threshold...) when pressing on it. Check the box to select
measurements and press on "Start Measuring" or "Cancel".
4 It starts datalogger.
5 After finish, press on "Save and close", "Save and go to datalogger" or
"Cancel".
6 To access datalogger library, go to home screen and press on
lower left corner.
7 In the library each datalogger is classified by function.
8 Press on any folder, then press on the specific datalogger to see data.
9 To remove a folder with dataloggers or a single datalogger, press on the
menu option
a folder or datalogger to remove. Select and accept.
10 To copy a folder with dataloggers or a single datalogger to a USB memory
in first place insert a USB memory in the USB slot. Press on menu option
and then press on "Save on USB". It shows a window with the path where
are the files to be copied. Confirm to save.
Chapter 4: TOOLS
and then on "Remove". It shows a window where to select
39
icon at the
September 2018