Promax RANGER mini User Manual page 26

Operation
►
1 Connect signal to the input through F/F or F/BNC adapter.
2 From the main screen press on the SCAN/TILT icon.
3 Press on TILT option at the bottom of the screen.
TILT function opens.
4
5 Press on the lower right corner to switch between Upstream and
Downstream band.
6 Press HOME
Screen Description
►
1 It shows pilot signals frequency and power. Press on frequency to change its
value.
•P1/P4: End pilot signals.
•P2/P3: Intermediate pilot signals.
2 TILT: Inclination rate in dB per MHz.
3 Power difference between P1 and P4.
4 Full band RF cable power.
Chapter 3: MEASUREMENT
key to get back to the main screen.
Figure 11.
21 September 2018