Aiv-2 Disable Wireless Zero Configuration Utility - Compex iWavePort Series User Manual

Appendix IV Wireless Zero Configuration Utility
When the Wireless Zero Configuration Utility is in use, a pop-up
message is displayed on the Utility when you attempt to create or
edit a configuration profile from the Profile Management tab of the
WLU108G Atheros utility.
CAUTION
If you activate BOTH (not recommended) the Wireless Zero
Configuration Utility and the Atheros Utility simultaneously, the
Profile setting configured by the Atheros Utility will be overridden
by those of the Wireless Zero Configuration Utility.

AIV-2 Disable Wireless Zero Configuration Utility

To turn Wireless Zero Configuration Utility off on Windows XP,
1. Open the Wireless Zero Configuration Properties dialog box.
2. Clear the check box Use Windows to configure my wireless network
settings.
3. When this check box is cleared, all profile settings will be controlled
by the WLU108G utility.
82