Table of Contents
Advertisement
Chapter 6
Compex WLU108G Utility Configuration
Next, you can see that the SSID is set to the same SSID as PC1 and that
Client Name is pre-configured to the name registered to PC2. You need
to give a name to your profile, e.g.
4.
Next, proceed to the Security tab and set the same security settings
as for PC1. You may refer to Step 10 and Step 11 on Page 40.
NOTE
The SSID and encryption key for PC1, PC2 and the notebook must
be the same in order to communicate with one another.
Also, if you are using a specific channel instead of Auto, PC1, PC2 and
notebook must be set with the same channel.
Daddy
.
42
Advertisement
Table of Contents
Need help?
Do you have a question about the iWavePort Series and is the answer not in the manual?