Declaration Of Conformity - Compex iWavePort Series User Manual

To comply with the FCC RF exposure compliance requirements, the following
antenna installation and device operating configurations must be satisfied:
a. For configurations using the integral antenna, the separation distance
between the antenna(s) and any person's body (including hands, wrists,
feet and ankles) must be at least 2.5cm (1 inch).
b. For configurations using an approved external antenna, the separation
distance between the antenna and any person's body (including hands,
wrists, feet and ankles) must be at least 20cm (8 inch).
The transmitter shall not be collocated with other transmitters or antennas.
ICES 003 Statement
This Class B digital apparatus complies with Canadian ICES-003.

DECLARATION OF CONFORMITY

Compex, Inc. declares that the product:
Product Name: Compex Wireless 108Mbps Super-G XR
Model No.: WLU108G conforms to the following Product Standards:
This device complies with the Electromagnetic Compatibility Directive
(89/336/EEC) issued by the Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards.)
Electromagnetic Interference (Conduction and Radiation):
EN 55022 (CISPR 22)
EMC Standards:
FCC Part 15: Subpart B, Subpart C; CE: EN 300 328-2, EN 300 826 (EN 301 489-17)
Low Voltage Directive:
EN 60 950:1992+A1:1993+A2:1993+A3;1995+A4;1996+A11:1997.
Therefore, this product is in conformity with the following regional standards:
FCC Class B - following the provisions of FCC Part 15 directive; CE Mark -
following the provisions of the EC directive.
USB 2.0 Adapter
TM
iii