Table of Contents
Advertisement
Chapter 6
Compex WLU108G Utility Configuration
5.
Next, proceed to Advanced tab. Set your Network Type to
and 802.11b Preamble to
6.
You may leave the Transmit Power Level at their default values.
7.
In the Wireless Mode section, check and confirm whether all options
are ticked.
8.
Next, proceed to Wireless Mode when starting Ad-hoc Network
section. The channels available depend on the regulatory domain.
If no other wireless adapters are found matching the ad hoc mode,
this selection specifies the channel with which the adapter starts a
new ad hoc network with. Please note that the wireless adapter
must match the wireless mode and channel of the other wireless
clients it associates to.
9.
Set the Channel to
detect the channel to use.
However, if you wish to set a specific channel, you mush ensure all
clients are in the same channel in order to communicate to one
another.
Short &Long
.
Auto
to let Compex WLU108G automatically
AdHoc
38
Advertisement
Table of Contents
Need help?
Do you have a question about the iWavePort Series and is the answer not in the manual?