Compex iWavePort Series User Manual page 59

Chapter 6 Compex WLU108G Utility Configuration
Alternatively, you can also check the connection from the MS-DOS
Prompt. From PC2, simply proceed to the Start Menu, Run... and type in
cmd
. Click on the OK button.
ping 192.168.168.1 –t
In the MS-DOS Prompt window, type , whereby this IP
address belongs to your access point.
When the screen appears:
Pinging 192.168.168.1: bytes=32 time=2ms TTL=128
Pinging 192.168.168.1: bytes=32 time=2ms TTL=128
Pinging 192.168.168.1: bytes=32 time=2ms TTL=128
.......
This indicates that the connection between the access point and the
wireless client has been established successfully! You can now access to
one another wirelessly!
For the rest of the workstations
Refer to the steps for configuring PC2.
If your other wireless clients are not using Compex WLU108G, you may
refer to the manual of these other adapters for details on Infrastructure
configuration.
For details on other authentication and encryption types, kindly refer to
Chapter 7 "Types of Authentication and Encryption mode" on Page 52.
50