Configuration On Infrastructure Mode - Compex iWavePort Series User Manual

Chapter 6 Compex WLU108G Utility Configuration
6.4

Configuration on Infrastructure Mode

In this example, two notebooks and PC2 act as wireless clients to
communicate with the wireless AP. Once all configuration has been
done, wireless clients with the same SSID as the AP will be able to access
wirelessly to PC1 via the wireless AP.
For AP
Ensure that you have enabled the DHCP server in your access point and
that your wireless clients are set to receive their IP address dynamically so
that the wireless AP can assign an IP address to them. Note the wireless
configuration settings of your access point as shown in the figure above.
46