Page 1
USB port. !" The UE202-B has a USB Type-A connector on one side and a RJ-45 Ethernet connector on the other side. It allows the connection of 10BASE-T or 100BASE-TX LAN using your computer’s USB interface.
Page 2
WINDOWS 98/ME DRIVER INSTALLATION Connect UE202-B to the USB interface of your computer. Figure 6 New Hardware Wizard (4 of 5) Figure 2 Connection to Computer The device driver will be installed. Power on the computer. Figure 7 New Hardware Wizard (5 of 5) Figure 3 New Hardware Wizard (1 of 5) Click Finish upon completion of the installation.
Page 3
Windows 2000/XP Ethernet. Connect one end of the cable to the RJ-45 port of the UE202-B adapter, and other end to a free port on a network hub or switch. Connect Side B of the cable extender to USB interface of your PC or...
Page 4
Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product described in this guide, without prior notice.
Need help?
Do you have a question about the UE202-B and is the answer not in the manual?
Questions and answers