Chapter 6 Compex Wlu108G Utility Configuration; Ad-Hoc Mode - Compex iWavePort Series User Manual

Chapter 6 Compex WLU108G Utility Configuration
Chapter 6 Compex WLU108G Utility Configuration
This chapter will elaborate on the Client Manager configuration of Compex
WLU108G using some simple examples.
Compex WLU108G can be configured for 2 types of wireless architectures – Ad-
hoc and Infrastructure. The different operational modes are shown in the
following diagrams to allow you to easily understand how to configure your
WLU108G.
6.1

Ad-hoc Mode

In an Ad-hoc architecture, the wireless clients communicate directly with
one another. No access point exists in such a wireless LAN configuration.
Each wireless client can directly transfer data packets with each other.
Usually, the operation would be automatically detected and configured
between the peers. However, if you wish to, you can also set a common
channel for all Ad-hoc clients to use. This will be illustrated in the following
section.
Wireless client
Wireless client
Wireless client
34